Bootstrap

First steps

Download the latest image from the releases page: https://github.com/jcorporation/myMPDos/releases
Transfer it to the sd-card. You can use e. g. balenaEtcher for this task

Customize the bootstrap file

Copy the bootstrap-simple.txt or bootstrap-advanced.txt to bootstrap.txt and change the options to your needs.

#
#Simple bootstrap configuration file for myMPDos
#
ROOT_PASSWORD="your_secure_password"
TIMEZONE="UTC"

#If WLAN is not set to true eth0 is configured
WLAN_ENABLE="true"
WLAN_SSID="ssid of your wlan"
WLAN_PSK="psk of the ssid"

AUDIOHAT="allo-digione"

First start

At the first start myMPD executes the bootstrap script to configure your instance according to bootstrap.txt.

It adds a data partition to the sd-card
It needs internet connectivity to set the time and update the packages.

The bootstrap log is saved to /boot/bootstrap.log.

References

FILE	DESCRIPTION
usercfg.txt	Custom raspberry configuration, edit this and not config.txt. The bootstrap script creates a default usercfg.txt if you don’t create it.
bootstrap.txt	Bootstrap file for myMPDos, examples are in folder mympdos
mpd.conf	Custom mpd.conf, the bootstrap script copies it to /etc/mpd.conf
mpd.custom.conf	Custom mpd configuration that is included in the default mpd.conf
mpd.replace	Can add, change and remove lines from default mpd.conf: example